areaDetector
3-13
EPICS areaDetector framework
|
#include <epicsTypes.h>
#include <epicsMessageQueue.h>
#include <epicsTime.h>
#include "asynNDArrayDriver.h"
Go to the source code of this file.
Classes | |
class | ADDriver |
Class from which areaDetector drivers are directly derived. More... | |
Macros | |
#define | AREA_DETECTOR_OK 0 |
Success code; generally asyn status codes are used instead where possible. More... | |
#define | AREA_DETECTOR_ERROR -1 |
Failure code; generally asyn status codes are used instead where possible. More... | |
#define | ADGainString "GAIN" |
Strings defining parameters that affect the behaviour of the detector. More... | |
#define | ADBinXString "BIN_X" |
(asynInt32, r/w) Binning in the X direction More... | |
#define | ADBinYString "BIN_Y" |
(asynInt32, r/w) Binning in the Y direction More... | |
#define | ADMinXString "MIN_X" |
(asynInt32, r/w) First pixel in the X direction; 0 is the first pixel on the detector More... | |
#define | ADMinYString "MIN_Y" |
(asynInt32, r/w) First pixel in the Y direction; 0 is the first pixel on the detector More... | |
#define | ADSizeXString "SIZE_X" |
(asynInt32, r/w) Size of the region to read in the X direction More... | |
#define | ADSizeYString "SIZE_Y" |
(asynInt32, r/w) Size of the region to read in the Y direction More... | |
#define | ADMaxSizeXString "MAX_SIZE_X" |
(asynInt32, r/o) Maximum (sensor) size in the X direction More... | |
#define | ADMaxSizeYString "MAX_SIZE_Y" |
(asynInt32, r/o) Maximum (sensor) size in the Y direction More... | |
#define | ADReverseXString "REVERSE_X" |
(asynInt32, r/w) Reverse image in the X direction (0=No, 1=Yes) More... | |
#define | ADReverseYString "REVERSE_Y" |
(asynInt32, r/w) Reverse image in the Y direction (0=No, 1=Yes) More... | |
#define | ADFrameTypeString "FRAME_TYPE" |
(asynInt32, r/w) Frame type (ADFrameType_t) More... | |
#define | ADImageModeString "IMAGE_MODE" |
(asynInt32, r/w) Image mode (ADImageMode_t) More... | |
#define | ADTriggerModeString "TRIGGER_MODE" |
(asynInt32, r/w) Trigger mode (ADTriggerMode_t) More... | |
#define | ADNumExposuresString "NEXPOSURES" |
(asynInt32, r/w) Number of exposures per image to acquire More... | |
#define | ADNumImagesString "NIMAGES" |
(asynInt32, r/w) Number of images to acquire in one acquisition sequence More... | |
#define | ADAcquireTimeString "ACQ_TIME" |
(asynFloat64, r/w) Acquisition time per image More... | |
#define | ADAcquirePeriodString "ACQ_PERIOD" |
(asynFloat64, r/w) Acquisition period between images More... | |
#define | ADStatusString "STATUS" |
(asynInt32, r/o) Acquisition status (ADStatus_t) More... | |
#define | ADShutterControlString "SHUTTER_CONTROL" |
(asynInt32, r/w) (ADShutterStatus_t) Open (1) or Close(0) shutter More... | |
#define | ADShutterControlEPICSString "SHUTTER_CONTROL_EPICS" |
(asynInt32, r/o) (ADShutterStatus_t) Open (1) or Close(0) EPICS shutter More... | |
#define | ADShutterStatusString "SHUTTER_STATUS" |
(asynInt32, r/o) (ADShutterStatus_t) Shutter Open (1) or Closed(0) More... | |
#define | ADShutterModeString "SHUTTER_MODE" |
(asynInt32, r/w) (ADShutterMode_t) Use EPICS or detector shutter More... | |
#define | ADShutterOpenDelayString "SHUTTER_OPEN_DELAY" |
(asynFloat64, r/w) Time for shutter to open More... | |
#define | ADShutterCloseDelayString "SHUTTER_CLOSE_DELAY" |
(asynFloat64, r/w) Time for shutter to close More... | |
#define | ADTemperatureString "TEMPERATURE" |
(asynFloat64, r/w) Detector temperature More... | |
#define | ADTemperatureActualString "TEMPERATURE_ACTUAL" |
(asynFloat64, r/o) Actual detector temperature More... | |
#define | ADNumImagesCounterString "NIMAGES_COUNTER" |
(asynInt32, r/o) Number of images collected in current acquisition sequence More... | |
#define | ADNumExposuresCounterString "NEXPOSURES_COUNTER" |
(asynInt32, r/o) Number of exposures collected for current image More... | |
#define | ADTimeRemainingString "TIME_REMAINING" |
(asynFloat64, r/o) Acquisition time remaining More... | |
#define | ADReadStatusString "READ_STATUS" |
(asynInt32, r/w) Write 1 to force a read of detector status More... | |
#define | ADStatusMessageString "STATUS_MESSAGE" |
(asynOctet, r/o) Status message More... | |
#define | ADStringToServerString "STRING_TO_SERVER" |
(asynOctet, r/o) String sent to server for message-based drivers More... | |
#define | ADStringFromServerString "STRING_FROM_SERVER" |
(asynOctet, r/o) String received from server for message-based drivers More... | |
#define | FIRST_AD_PARAM ADGain |
Enumerations | |
enum | ADShutterStatus_t { ADShutterClosed , ADShutterOpen } |
Enumeration of shutter status. More... | |
enum | ADShutterMode_t { ADShutterModeNone , ADShutterModeEPICS , ADShutterModeDetector } |
Enumeration of shutter modes. More... | |
enum | ADStatus_t { ADStatusIdle , ADStatusAcquire , ADStatusReadout , ADStatusCorrect , ADStatusSaving , ADStatusAborting , ADStatusError , ADStatusWaiting , ADStatusInitializing , ADStatusDisconnected , ADStatusAborted } |
Enumeration of detector status. More... | |
enum | ADImageMode_t { ADImageSingle , ADImageMultiple , ADImageContinuous } |
Enumeration of image collection modes. More... | |
enum | ADFrameType_t { ADFrameNormal , ADFrameBackground , ADFrameFlatField , ADFrameDoubleCorrelation } |
enum | ADTriggerMode_t { ADTriggerInternal , ADTriggerExternal } |
#define ADAcquirePeriodString "ACQ_PERIOD" |
(asynFloat64, r/w) Acquisition period between images
#define ADAcquireTimeString "ACQ_TIME" |
(asynFloat64, r/w) Acquisition time per image
#define ADBinXString "BIN_X" |
(asynInt32, r/w) Binning in the X direction
#define ADBinYString "BIN_Y" |
(asynInt32, r/w) Binning in the Y direction
#define ADFrameTypeString "FRAME_TYPE" |
(asynInt32, r/w) Frame type (ADFrameType_t)
#define ADGainString "GAIN" |
Strings defining parameters that affect the behaviour of the detector.
These are the values passed to drvUserCreate. The driver will place in pasynUser->reason an integer to be used when the standard asyn interface methods are called. (asynFloat64, r/w) Gain
#define ADImageModeString "IMAGE_MODE" |
(asynInt32, r/w) Image mode (ADImageMode_t)
#define ADMaxSizeXString "MAX_SIZE_X" |
(asynInt32, r/o) Maximum (sensor) size in the X direction
#define ADMaxSizeYString "MAX_SIZE_Y" |
(asynInt32, r/o) Maximum (sensor) size in the Y direction
#define ADMinXString "MIN_X" |
(asynInt32, r/w) First pixel in the X direction; 0 is the first pixel on the detector
#define ADMinYString "MIN_Y" |
(asynInt32, r/w) First pixel in the Y direction; 0 is the first pixel on the detector
#define ADNumExposuresCounterString "NEXPOSURES_COUNTER" |
(asynInt32, r/o) Number of exposures collected for current image
#define ADNumExposuresString "NEXPOSURES" |
(asynInt32, r/w) Number of exposures per image to acquire
#define ADNumImagesCounterString "NIMAGES_COUNTER" |
(asynInt32, r/o) Number of images collected in current acquisition sequence
#define ADNumImagesString "NIMAGES" |
(asynInt32, r/w) Number of images to acquire in one acquisition sequence
#define ADReadStatusString "READ_STATUS" |
(asynInt32, r/w) Write 1 to force a read of detector status
#define ADReverseXString "REVERSE_X" |
(asynInt32, r/w) Reverse image in the X direction (0=No, 1=Yes)
#define ADReverseYString "REVERSE_Y" |
(asynInt32, r/w) Reverse image in the Y direction (0=No, 1=Yes)
#define ADShutterCloseDelayString "SHUTTER_CLOSE_DELAY" |
(asynFloat64, r/w) Time for shutter to close
#define ADShutterControlEPICSString "SHUTTER_CONTROL_EPICS" |
(asynInt32, r/o) (ADShutterStatus_t) Open (1) or Close(0) EPICS shutter
#define ADShutterControlString "SHUTTER_CONTROL" |
(asynInt32, r/w) (ADShutterStatus_t) Open (1) or Close(0) shutter
#define ADShutterModeString "SHUTTER_MODE" |
(asynInt32, r/w) (ADShutterMode_t) Use EPICS or detector shutter
#define ADShutterOpenDelayString "SHUTTER_OPEN_DELAY" |
(asynFloat64, r/w) Time for shutter to open
#define ADShutterStatusString "SHUTTER_STATUS" |
(asynInt32, r/o) (ADShutterStatus_t) Shutter Open (1) or Closed(0)
#define ADSizeXString "SIZE_X" |
(asynInt32, r/w) Size of the region to read in the X direction
#define ADSizeYString "SIZE_Y" |
(asynInt32, r/w) Size of the region to read in the Y direction
#define ADStatusMessageString "STATUS_MESSAGE" |
(asynOctet, r/o) Status message
#define ADStatusString "STATUS" |
(asynInt32, r/o) Acquisition status (ADStatus_t)
#define ADStringFromServerString "STRING_FROM_SERVER" |
(asynOctet, r/o) String received from server for message-based drivers
#define ADStringToServerString "STRING_TO_SERVER" |
(asynOctet, r/o) String sent to server for message-based drivers
#define ADTemperatureActualString "TEMPERATURE_ACTUAL" |
(asynFloat64, r/o) Actual detector temperature
#define ADTemperatureString "TEMPERATURE" |
(asynFloat64, r/w) Detector temperature
#define ADTimeRemainingString "TIME_REMAINING" |
(asynFloat64, r/o) Acquisition time remaining
#define ADTriggerModeString "TRIGGER_MODE" |
(asynInt32, r/w) Trigger mode (ADTriggerMode_t)
#define AREA_DETECTOR_ERROR -1 |
Failure code; generally asyn status codes are used instead where possible.
#define AREA_DETECTOR_OK 0 |
Success code; generally asyn status codes are used instead where possible.
#define FIRST_AD_PARAM ADGain |
enum ADFrameType_t |
enum ADImageMode_t |
enum ADShutterMode_t |
enum ADShutterStatus_t |
enum ADStatus_t |
Enumeration of detector status.
enum ADTriggerMode_t |